Description
The Mantaro Calculator MCP provides a comprehensive suite of engineering calculation tools for RF/microwave design, PCB layout, signal integrity analysis, and electronic circuit design.
• 📡 Transmission Line Calculations: Microstrip, stripline, coaxial, twisted pair impedance calculations
• 🔌 Passive Component Design: Air core inductors, toroids, flat spirals, capacitors, resistors
• 🎛️ Filter Design & Analysis: LC resonant circuits, RLC filters, Pi filters, Sallen-Key filters
• 🔄 Impedance Matching: L-networks, Pi/Tee attenuators, resistive splitters
• 📊 Signal Integrity: VSWR analysis, return loss, skin depth calculations
• 🧮 Circuit Analysis: Nodal analysis, Thévenin/Norton equivalents, Y-Delta transforms
• 🎨 Schematic Generation: Optional KiCad schematic output for select tools
• 📐 E-Series Calculator: Find nearest standard component values (E12, E24, E96 series)
Perfect for RF engineers, PCB designers, and electronics professionals who need accurate, industry-standard calculations for practical circuit implementation.
Example prompts
Calculate the impedance of a microstrip with 0.3mm width, 0.035mm thickness, 0.2mm dielectric height, and εr=4.4
Design an L-network to match a 10+j5 Ω antenna to a 50Ω transmission line at 915MHz
I need a resistor value close to 4.7kΩ - what are the nearest E96, E24, and E12 series values?
Calculate the inductance of an air core inductor with 10mm inner diameter and 25 turns of 22 AWG wire
Design a Pi filter with 10µH inductor and 50Ω source resistance for -20dB attenuation at 1MHz
What's the characteristic impedance of RG-58 coax with 0.9mm inner conductor and εr of 2.3?
Calculate VSWR and return loss when connecting a 50Ω source to a 75-j10 Ω load
Design a Sallen-Key highpass filter with 10kHz cutoff frequency and Butterworth response
